Alphacool Eisblock HDX-2 PCI-e 3.0 x4 adaptor for M.2 NGFF Passive Cooling Block

Description

Product Information
What's this?
The Alphacool Eisblock HDX-2 is a massive passive cooler for your M.2 SSD. The supplied PCIe card on which the cooler is mounted also offers the SSD the highest possible bandwidth of around 3900 MB / s.
Highlights
No more throttling of the SSD due to overheating
Enormously large cooling surface for optimal cooling
Theoretical bandwidth of around 3900 MB / s possible
Optimal protection of your SSD by the cooler
The Alphacool Eisblock HDX-2 cooler offers outstanding cooling for your M.2 SSD. With high, sustained data transfers, the performance of an M.2 SSD without cooling drops dramatically and can drop to up to 10% of the actual performance. When large amounts of data are transferred, the memory controller and the chips are very hot until a protective mechanism kicks in and the SSD's performance is severely throttled. This can be counteracted by actively cooling the SSD. After the M.2 HDX cooler for mainboards with M.2 slots, Alphacool offers the HDX-2, a massive passive cooler with a cooling surface that is many times larger than that of the HDX M.2 cooler.
The M.2 SSD is screwed onto the supplied PCIe board and the cooler is mounted on it. The cooler consists of a large, passive aluminum heat sink that covers the entire M.2 SSD. As a result, the entire M.2 SSD is optimally cooled and a drop in performance due to excessively high temperatures is prevented. The PCIe board is inserted into a 4xPCIe slot and screwed to the housing. The data can be transferred at a speed of over 3900 MB / s. That's a lot more bandwidth than most SSDs can use. Compared to conventional SATA-SSD in 2.5 “format, this is an increase of 600%, because the maximum bandwidth for this connection is 640 MB / s. In combination with the cooler, the plug-in card can also offer significantly better transfer rates than mainboard slots. Often M.2 SSDs are only connected to mainboards with 2x PCIe, which corresponds to halving the maximum data transfer rate. In addition, it is difficult to cool an M.2 SSD on a mainboard properly, as the graphics card is usually mounted directly above or below it and the surrounding area naturally heats up strongly.
With the Alphacool Eisblock HDX-2 you can avoid all of these factors and get the most out of your M.2 SSD.
Technical specifications
Dimensions (LxWxH): 100 x 81.5 x 20mm
Material: aluminum
PCIe card type: 4x PCIe
Compatibility: M.2 2280 PCIe SSDs
Maximum bandwidth PCIe card: 3938 MB / s
scope of delivery
1x Alphacool Eisblock HDX-2 PCe 3.0 x4 adapter for M.2 NGFF with passive cooler - black
Mounting material
PCIe plug-in card (M.2 adapter)
Slot cover
ATTENTION
There is a protective film on the PCI-E plug-in contacts, which must be removed before commissioning.
Manufacturer:    Alphacool
Connection:    2xG1 / 4
Material lid:    Brass
Material floor:    aluminum