US Dental Wireless Digital X-Ray Imaging System Handheld X-Ray Unit BLX 8 Plus

Description

moban2
Description
US STOCK Dental Wireless Digital X-Ray Imaging System Handheld X-Ray Unit BLX 8 Plus
Features
Product introduction:
This model combines the advantages of similar products found at home and abroad; it eliminates the shortcomings of the on-frequency X-ray machine (high current intensity and excess amounts of scrap x-rays).Using a Toshiba 0.3 micro-focus tube.The tube voltage frequency of this machine is 30 KHz，and the tube current is 1 MA. The radiation scope is at an angle of 24 degrees， located within a distance of 1.2 meters ahead. This is an innovative Chinese design named the "Green X-ray Machine."
TECHNICAL SPECIFICATIONS：
Tube Voltage
60kV
Tube Current
1mA
Time Exposure
1~~9s
High pressure generator
30kHz DC
Rated Power
60w
Focal Spot To Skin Distance
>20CM
Focus Spot Size
0.3mm(TOSHIBA)
Charger Input Voltage
AC110V～220V
Supply Frequency
50Hz±1%
Radiation Leakage
<20ugy/h
Battery
24V DC 8000MA
Weight
2KG
Dimensions
25 cm×11.5 cm×17cm (L×W×H)
Reference of the Angles：
Tooth
Upper
Lower
1-2
42
-15
3
45
-18
4-5
30
-10
6-8
28
-5
Reference of the time of exposure：
Tooth
Adult
Child
Central & Lateral
0.8-1.2
0.8-1.0
Cuspid & 1st Bicuspid
1.2-1.4
1.0-1.2
Upper 5，6
1.6-1.8
1.4-1.6
Upper 7，8
3.0-3.5
2.8-3.3
Lower 5，6
1.8-2.0
1.6-1.8
Lower 7，8
2.0-2.5
1.8-2.3
Packing List:
Main machine 1pcs
Power line 1pcs
User manual 1pcs
Operation of the Main Unit :
Upon receiving，open the box and check the product for possible damage during shipping. Make sure the fittings on the encasement list are packaged within the box.
Install the blue ray tube to the foreside of the ball head，then tighten it. Turn on the Power；the pilot lamp will be light up.During this time，the digital tube will show the fore setting time. Now the equipment is in standby mode.Setting the time (Skip to next step if unneeded) Use the "SET"，"+"，and" -" buttons to reset the time as follows: press SET，the pilot lamp above is illuminated， the machine is now in the time setting mode→then press "+" and" -" to set the time needed (time range is 1-9seconds); press set again when the time is adjusted the light lamp is off. The equipment is now in standby mode. Put the Tooth film plumb behind the tooth which is going to be taken picture， and be as close as possible (the smooth side stick to the tooth)Keep the ball head plumb to the tooth projection position; Have the ball head，tooth， and tooth film steadily mutually plumb. After positioning，use the ON/OFF on the main Unit， to take pictures. (Notice: gently press 0.5 sec to turn it on)After exposure to the tube，press the start button again in case of an emergency to stop shooting and return to standby status. (At this point there was no output ray，so the dental films can be used again). Repeat step 6 to reset the picturing time.To repeat the picturing process，please repeat steps 7 to 9. Turn the power off when the work is finished，press POWER， making sure the pilot lamp is off.Don't keep the machine long in standby mode.
Points for Attention:Make sure the angle of film，tooth，and ball head are properly aligned when taking a picture. Keep them steady until the last step of picturing; making sure that there is no change in any of their positions.Remember to turn the power 0ff when work is done.Charge the battery if the machine cannot work and the red lamp ligntAfter turning the power on，wait one minute before taking pictures，this allows the ray to provide a steady output.The equipment switches into protection mode automatically when the voltage is incorrect. If this occurs， it will not be able to carry out the normal work of filming.When taking pictures，the ON/OFF button could stop the objection and then the machine goes back to the preparation mode. Use high quality tooth film and developing liquid to make clear pictures.Handle the ball head gently while in use，so as not to damage the delicate component. We usually set the time between 3-8 seconds when taking pictures，but the actual time of ray output is 0.2-0.5 seconds.If a situation occurs， preventing the machine from taking regular pictures， contact the seller to solve the problem instead of trying to service the product yourself. Keep the tooth film and the liquid in a proper place and use them within the shelf-life period. Development of films should be performed at temperatures ranging between 23-25 degrees Celsius to ensure the image quality. Other requests accordance with the scope of the technical parameters.
Please read the manual carefully before using.
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller: Yang Li
Chongqing, China
telephone number: 17302327764
The item has been cleaned and handled in accordance with the manufacturer's instructions
Payment
a)   Paypal accepted.
b)   Please accomplish payment within 7 days after purchase. If you do have any reason and cannot make payment timely, please kindly email me. Otherwise, all unpaid items will be filed an unpaid item dispute through eBay.
c)   Import duties, taxes and charges are not included in the item price or shipping costs. These charges are the buyer's responsibility. Please check with your country's customs office prior to bidding/buying to determine what these additional costs will be.
Delivery Details
Note:
We can offer the tracking number for u to check the status of your item in 2 days after we deliver it. For international shipping, customs duties might be possible for some countries, they are buyers'responsibility, Hope his could be understood. S&H charged dose not include any those fees. We are not responsibility for the delay of clearance in the buyer's country, but we will help you clear as supplying some files. If the item is in customs or post office for some days, pls contact with local customs actively, otherwise, if the item returns to us, the buyer will pay for the shipping fee for resend or refund except the shipping fee. Few states need to pay remote surcharge. Don't worry, I will tell you before you pay if it's need.
We only ship to your PayPal address. Please make sure it's correct. You can email us in 1-2 days to change ur shipping address, or we are not responsible for it after we deliver ur products.
Return Policy
Your SATISFACTION is our ultimate goal. We work hard to earn your trust and future business.
a)   Please check the package first before you sign for the package. If the package has any damage, please file a claim on your local shipping company.
b)   If you have a defective item, you can return it or ask for a discount. Please contact us within 2 days after you receive the package.
c)   What you returned must be unused and in the original packaging as received. Customer is responsible for shipping charges on returned items.
d)   We will refund the money to you when we get the return items. Or replace item for you.
Terms of Sales
Please leave us your phone number for smooth and fast delivery.
Our prices does not include any taxes, VAT and other hidden charges.
Buyers should be responsible for your customs duties if there is any.
If you need some profiles, please contact us. We will attach it via Email.
About us
We are factory founded dental equipment Wholesaler and Retailer.
We offer 1 full year warranty for most of our items(please contact us for more info).
Each item will be quality checked before shipping to our customers.
Contact us
If you have any questions about our service or products. You can send us eBay message or Email.
You will be replied within 24 hours(48 hours in the weekend).
Seller`s name: orilaodental
Shenzhen.China